Matthew Wright of MDNX in Bracknell, Berkshire, UK sends a probe that monitors a Juniper M/MX series router for CPU/mem resource and also alarm conditions. "Our core network uses Juniper routers and we needed a way for Intermapper to alert on any problems."

Monitors CPU, memory, critical log messages, and the number of passed/blocked packets for a TippingPoint IPS.

Extracts HTTP test data from a Cisco IP SLA configuration that is running on a Cisco router or switch.

Extracts FTP test data from a Cisco IP SLA configuration that is running on a Cisco router or switch.

Polls each interface of an Astrocom device, displays the current traffic in and out of that interface in kilobytes/second, and generates an alert if traffic on the monitored interface exceeds thresholds defined in the probe. This probe currently can monitor up to three interfaces at a time.

James Pugh from eBay Enterprise sends a probe that monitors the port and bypass status of a Silicom Intelligent Bypass switch. "These bypass switches don't use any standard MIBs. We needed a way to monitor the status of the interfaces, whether up or down, as well as the status of the bypass mode should it be triggered to take the monitoring equipment that is otherwise inline out of the link."

Provide Informational, Tables, Resource Usage, and Hardware Health information for different series of Cisco Integrated Services Routers.

This probe monitors a physical interface that should be considered a CRITICAL link to a location or service. The probe uses two tables found in the IF-MIB: The ifTable with generic Ethernet details. The ifXTable that supports 64 bit 10G interface counters.

Monitors traffic in packets per second, instead of bytes per second. This probe will provide a notification when traffic on a certain port/interface exceeds thresholds and give alarms when that interface goes down.

Gives a notification when traffic on a certain port/interface exceeds thresholds. Revised to give alarms if that interface goes down.