Monitors Temperature, Humidity, & the Dry Contact in the MeshNet Gen 1 Temp/Humidity Sensors.

Monitors the Data Aire gForce Data Center AC Units. Matt Smith of County of Santa Barbara submitted this probe in the 2017 probes contest.

Monitors the very clever Weather Goose environmental monitoring device. The WxGoos-1 has built-in sensors for temperature, humidity, airflow, sound, light, and three I/O terminals and has a web, SNMP, XML, PDA, and WAP interfaces. This probe is for the WxGoos-1 internal sensors only. This probe graphs all the sensors and has low- and high-alarm and warning for temp. The WeatherGoose is made by I.T...

Uses a TrippLite SNMPWEBCARD UPS/PDU add-on card as a temperature and humidity monitor. Allows the user to graph these values to track conditions at the device location using SNMP.

Monitors the temperature measured by the SNMP-Link SL60 & SL61 sensor units, manufactured by Omnitronix of Seattle, WA. These boxes also have RS-232 ports, switch closure inputs and relay outputs, all of which can be read by SNMP.

Provides internal and external temperature monitoring and alarm capability.

Monitors the temperature, humidity, and airflow of a Netbotz 320 device. It will also alert when the camera motion sensor goes off.

Ilias Manos from Piraeus Port Authority in Piraeus, Greece sends a probe that monitors the temperature, humidity, water and open door of a APC Netbotz 200. Ilias writes, "We needed a software to monitor the temperature, humidity, water and open door of racks with Netbotz. Intermapper Probe Cost = Free."

Monitors an MGE "UM-Sensor" environmental sensor with a UM-Link Ethernet interface via SNMP. The probe can be used as a starting point for the design of similar probes, but this implementation assumes a single UM-Sensor (up to 4 could be daisy-chained) on the assigned comm port of the UM-Link interface (i.e. it only looks at the first entry in table that indexes sensor units).

Monitors a few or a hundred HA7Net temperature sensors: see the HA7Net page for more details.