Monitors average CPU utilization and number of active sessions on Cisco VPN 3000 series concentrators.

Benjamin Hubert at Exane created this probe to measure CPU, Memory, and health for stacked Cisco switches.

Provide Informational, Tables, Resource Usage, and Hardware Health information for Cisco Supervisor Engine.

Kevin Cheng sends a probe that monitors the IP SLA characteristics for a Cisco router/switch. This probe can make an on-demand snmp query of the IP SLA Jitter test data and also collect the last 60 minutes of jitter data from a Cisco device.The probe will measure the RTT, latency and jitter between two routers for a particular interface/ifIndex.

Monitors the performance of a Cisco SCE 2020 packet shaper. It can send alerts based on the number of active subscribers, the CPU utilization of any of the three Traffic Processors, and the Flows utilization of any of the three Traffic Processors.

Monitors latency, jitter, or packet loss measured by a Cisco router with SAA installed, and produces alarms and warnings when they exceed user-specified thresholds.

Provide Informational, Tables, Resource Usage, and Hardware Health information for Cisco 72xx and 76xx series routers.

Provides Informational, Tables, Resource Usage, and Hardware Health information for Cisco 5xx series PIX Firewall.

This probe monitors the particular OSPF neighbor state of an interface on a Cisco or Juniper router. It generates alarms when the OSPF state is not full.

Benjamin Hubert at Exane created this probe to monitor the CPU, Memory utilization, and current BGP peer connections.